WEBSHOP » FIETSONDERDELEN » STUURPENNEN » ITM TRIANGO WING CARBON/ALU 110 mm

ITM TRIANGO WING CARBON/ALU 110 mm

ITM9C ITM TRIANGO WING CARBON/ALU 110 mm

ITM9C ITM TRIANGO WING CARBON/ALU 110 mmITM9C ITM TRIANGO WING CARBON/ALU 110 mm

€ 70,00 € 15,00

Beschikbaar - Voorraad: 1


120MM€ 15,00 Toevoegen aan winkelmandje


An incredibly stiff handlebar stem, designed to be matched up with the ITM Triango Wing handlebar for a formidable combination providing utmost rigidity in sprint accelerations. The Triango Stem is carbon fibre reinforced and features a wider than normal handlebar clamp to minimise bar deflection under high torsional loads. The Triango Wing seatpost model compliments the stem for a complete component set.cid-image004-jpg-at-01cca36a


Construction for the Triango Wing Stem stem starts out with a solid
7075 grade aluminium billet. This is forged in a multi step process to create a strong and lightweight component. Forging involves literally pressing a metal block into shape under immense pressure, which better aligns the grain structure of a part. The finished product is stronger than simply machining away material to create the shape. Next, to allow for superior bonding for the carbon outer layer, the forged stem is CNC machined to generate a textured surface for the carbon to adhere to. A pre-cut carbon pattern is then applied to the stem exterior before the assembly is clamped into an aluminium mold. This is then placed in an autoclave under pressure and heat. The final part, made of highly compressed carbon fibre bonded to a rigid aluminium core, is extremely stiff and strong.

The face-plate of the Triango Wing stem is also forged from 7075 aluminium with a
3K carbon fibre exterior layer. Shaping of the clamp is a unique design for the Wing stem and permits greater surface area contact with the handlebar for a stiffer interface between the two parts. At its widest point the clamp is 47.5mm in width, and the square edged profile adds more material, again to minimise flex.

The Triango Wing stem is available in lengths from 70
mm to 130mm in ten millimetre increments. The relatively standard negative 8 degree angle results in a slight 7-10 degree rise from horizontal when fitted on a road bike. The fork steerer clamp is dimensioned for standard 1 1/8” forks and the 41mm clamp height minimises the total fork steerer length to reduce weight.

Specifications:

Weight: 157g (in 110mm length)
Sizes:110mm
7075 grade aluminium
3K Carbon outer wrap
Wide 47.5mm face plate
Angle: -8 Degrees
Fork Steerer Clamp Diameter 28.6mm
Handlebar Clamp Diameter 31.8mm
Steerer Clamp Height: 41mm

Webshop gemaakt met EasyWebshop